Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterFast, Reliable Custom & Geometric Windows Across Sunrise
Custom and geometric window replacement in Sunrise means working inside Broward County’s High Velocity Hurricane Zone, where every shaped opening, arch, and oversized lite must carry a Miami-Dade NOA and Florida Product Approval or the permit gets rejected. We handle that paperwork before the first cut, because our Custom & Geometric Windows team has spent years navigating Sunrise Lakes HOA submittals, HVHZ wind-load calcs, and aging concrete-block openings that haven’t been square since the 1970s. If you live in Sunrise and you’re staring at a corroded jalousie or a builder-grade sliding window that never quite fit the arch, call (904) 747-8989 and we’ll measure it right, quote it straight, and install it to code the first time.
Key Takeaways
- Every custom or geometric window in Sunrise must carry a Miami-Dade NOA and Florida Product Approval. No exceptions under HVHZ code.
- Expect to pay $1,200-$3,800 per opening for shaped or arched impact windows in Sunrise, and $3,000-$6,500 for oversized or radius-top units.
- Custom impact fabrication typically runs 4-6 weeks from order to delivery. We install in as fast as a single day once your units arrive.
- Sunrise Lakes and other HOA-governed communities often require product uniformity across a facade. We bring HOA-ready submittals on the first visit.
- Winslow Windows & Doors is owned by Ed Winslow. A live person answers every call, day or night.
Why Winslow Windows & Doors Is Sunrise’s Preferred Custom & Geometric Windows Company
We’re not a national chain with a call center in another state. We’re Custom & Geometric Windows in Sunrise, handled by a local owner-operator who puts his name on the truck and the work. Ed Winslow founded this company and still runs it, which means when a Sunrise Lakes Phase III condo board needs submittal documents yesterday, we can produce them without waiting on a corporate approvals desk.
Sunrise homeowners tell us the same thing over and over: other contractors showed up, measured wrong, or got the HOA paperwork rejected. We’ve built our reputation in Sunrise on getting the product approval and the NOA right the first time, matching existing finishes, and keeping the job site clean enough that your neighbors don’t complain to the association. The Custom & Geometric Windows work we do here isn’t a side line. It’s the core of what we handle across Broward, and we do it with fixed pricing, written line-item quotes, and no change orders once the contract is signed.
Our Custom & Geometric Windows Services in Sunrise
Custom Impact Windows
Sunrise sits fully inside the HVHZ, the strictest impact-glazing code in the nation. A custom impact window here isn’t just a shaped piece of glass. It’s a unit engineered to a specific design pressure (PSF rating, never above +/-100) for the exact opening dimensions, floor height, and wind zone of your building. We size every unit to the opening and pull the NOA documentation before order, so your permit inspection passes the first time.
Geometric & Shaped Windows
Trapezoids, pentagons, triangles, octagons. Sunrise’s 1970s and 1980s homes and condos often have original geometric openings that were framed for single-pane glass and have since twisted out of square. We reframe to true dimension, then order a shaped impact unit that matches the opening exactly. In Sunrise Lakes communities especially, we match the HOA’s required finish and glass tint so the unit disappears into the facade.
Arched & Curved Windows
Radius-top and eyebrow windows are common in Sunrise’s low-rise condo buildings, and they’re also the most frequently bungled job we’re called to fix. The framing has to be shimmed and squared before the unit goes in, or the sash binds and the seal fails during the first big storm. We cut and reframe the rough opening, set the arch true, and install with impact glazing rated for the east-facing wind exposure that Sunrise Lakes and other communities get hammered with.
Oversized Openings
A floor-to-ceiling fixed picture window or a wide sliding glass wall isn’t a standard order. It’s a custom-engineered assembly that has to carry wind load across a large span without deflecting. We’ve done oversized impact openings in Sunrise for owners who want the lake view without the mullion grid. These runs $3,000-$6,500 per opening, and the permit package includes structural calcs, not just a product approval number.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Sunrise
We’re an authorized installer for PGT, CGI, CWS, ES Windows, ECO Window Systems, Mr-Glass, Therma-Tru, and ViewLux. For Sunrise jobs we typically spec PGT’s WinGuard or CGI’s Sentinel lines for impact-rated custom shapes, and ES Windows or ECO Window Systems when the HOA requires a specific aluminum finish or a slimmer frame profile. Because we stock local parts and have direct supplier relationships, we’re not waiting on a distributor’s backorder when your Sunrise Lakes board sets a replacement deadline.
Common Custom & Geometric Windows Problems We See in Sunrise Homes
- Seized jalousie windows in 1970s ranches and condos. Decades of South Florida humidity and salt air corrode the aluminum frames and operating hardware until the glass won’t open or close. In Sunrise Lakes Phase III we recently replaced a jalousie over a garden tub with a custom radius-top PGT impact window because the original was beyond repair.
- Out-of-square rough openings from settling. Concrete-block construction settles. Openings that were square in 1975 aren’t square now, and a factory-shaped window won’t fit until we reframe to true dimension. Skipping that step causes sash bind and seal failure.
- HOA rejection of custom shapes or finishes. Sunrise Lakes and similar multi-phase condo associations enforce uniform exterior appearance. Install a custom arch in the wrong bronze or a non-matching glass tint, and the board can force replacement. We submit HOA-ready product documents on the first visit.
- Undersized design pressure on large east-facing openings. A big arched or curved window on the east side of a Sunrise Lakes building takes the full brunt of storm winds. If the design pressure is undersized, the unit deflects, the glass flexes, and the seal fails. We spec every unit to the opening, not to a generic wind-speed rating.
What Custom & Geometric Windows Costs in Sunrise
Here’s what we’re actually seeing in Sunrise right now. A standard impact window runs $800-$1,500 per unit installed. Impact single-hung windows land between $900 and $1,800. Large or custom openings, including arches, radius-tops, and oversized fixed lites, run $2,500-$5,000 per opening. Whole-home packages across a Sunrise ranch or condo unit typically fall between $8,000 and $25,000, depending on the number of openings and the complexity of the shapes.
What moves the price here: the number of openings, the wind zone and floor height, whether the opening needs reframing, the frame material, and the finish the HOA requires. A Sunrise Lakes third-floor unit with a bronze aluminum finish costs more than a ground-level ranch with white vinyl. Condo jobs also carry the HOA submittal burden, which we absorb into our quote so you’re not surprised later. Call (904) 747-8989 for a free in-home measure and a written, fixed quote. No change orders. The price we quote is the price you pay.
Pricing for Custom & Geometric Windows in Sunrise, FL
A custom arch or radius-top impact window in Sunrise runs $1,200-$3,800 per opening, depending on glass package, frame finish, and whether we need to reframe the rough opening. Oversized geometric units and floor-to-ceiling fixed lites run higher, typically $3,000-$6,500. If the HOA requires a specific bronze or anodized finish, expect a 10-20% adder over standard white. Every quote from us is a written line-item estimate, and we don’t change the number once the contract is signed. Call (904) 747-8989 to schedule your free measure.
Florida Pays You Back
Impact windows in Sunrise aren’t just protection. They’re a tax and insurance play. The My Safe Florida Home program offers matching grants up to $10,000 for qualifying wind-mitigation upgrades, and impact-resistant windows and doors qualify. Florida also exempts impact-rated windows and doors from sales tax. On the federal side, the 25C energy credit covers 30% of the product cost on qualifying Low-E units, up to $600 per year. After a wind-mitigation inspection (typically $75-$150), most Sunrise homeowners see windstorm premium credits averaging around 25% on the windstorm portion of their policy. Programs change and carriers set final numbers, but the stack is real.
We Also Serve Cities Near Sunrise
Our crews cover Sunrise and the surrounding Broward corridor. If you’re in Fort Lauderdale, Oakland Park, Wilton Manors, or Lauderdale-by-the-Sea, the same Miami-Dade NOA and Florida Product Approval process applies, and we handle it the same way. One call to (904) 747-8989 gets you a local measure and a straight quote.
Serving Sunrise, FL - Our Local Coverage Area
We’re based in the Sunrise area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Custom & Geometric Windows in Sunrise
Yes. Every window replacement in Sunrise, including round-tops, eyebrows, arches, and geometric shapes, must carry a Miami-Dade NOA and Florida Product Approval as part of the permit package under Broward County HVHZ code. No NOA, no permit. Call (904) 747-8989 and we’ll pull the correct documents before order.
You can, and it’s a job we’ve done in Sunrise Lakes and surrounding ranch neighborhoods. The jalousie frame comes out, the opening gets reframed to true dimension, and the custom arch goes in with a finish and glass tint matched to the existing exterior. If an HOA governs the property, we include the submittal package in our quote.
They are, provided the unit is engineered to the required design pressure for the specific opening, floor height, and wind zone. A large fixed picture or a wide arch can’t use a generic impact rating. We spec every oversized Sunrise unit to a PSF rating that does not exceed +/-100, with structural calcs in the permit package. Call (904) 747-8989 and we’ll tell you what’s feasible for your opening.
Often yes, and that’s a Sunrise-specific dynamic worth planning for. In Sunrise Lakes and similar multi-phase condo communities, the association enforces uniform exterior appearance. Once one unit replaces a window, the board frequently adopts that product line and finish as the association standard and sets a timeline for neighboring units to match. We bring HOA-ready product submittals on the first visit, so your board approves the product and your neighbors have a clear path to match it.
It cuts them measurably. Low-E impact glass rejects a large portion of the solar heat that South Florida sun pushes through single-pane aluminum frames, which is what most original Sunrise windows are. Homeowners we’ve worked with in Sunrise report cooling load drops of 15-25% in rooms with direct east or west exposure, alongside the hurricane protection. For an exact quote on Low-E custom shapes, call (904) 747-8989 and we’ll measure free.
Written by Ed Winslow, Owner at Winslow Windows & Doors, serving Sunrise and Broward County with custom and geometric impact glazing since 2011.
Six Reasons Homeowners Choose Winslow Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.