Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
CWS Windows & Doors in Oakland Park, FL | Winslow Windows & Doors
We’re Winslow Windows & Doors, and we provide independent CWS service across Oakland Park. Repairing or replacing CWS windows and doors here is different from anywhere else in Broward County because of one hard fact: Oakland Park sits squarely inside the High Velocity Hurricane Zone, and a lot of its 1950s and 1960s CBS homes still carry original jalousie windows that no CWS retrofit can save. That changes everything about what gets repaired, what gets replaced, and what your insurance company will accept. Call us at (904) 747-8989 for a free estimate.
Why Oakland Park Residents Choose Us for CWS Service
We’ve been fixing CWS windows and doors in Broward County long enough to know the product line the way a mechanic knows a particular engine. That matters in Oakland Park, where salt-humidity corrosion hits aluminum frames hard and HVHZ wind cycles punish weak corner welds. Our techs are trained in CWS 6000, 7000, 8000, and 9500 series service, and we keep OEM-compatible balances, rollers, and weatherstripping on hand for faster turnarounds. We’re an independent CWS service provider, not authorized by CWS, which means we can tell you straight when a repair makes sense and when a full replacement does. Ed Winslow grew up in Miami and trained in building construction technology at Miami Dade College before spending years working through every phase of window and door installation. He put his name on this business because he stands behind the work. When you call us about a CWS issue in Oakland Park, you’re talking to people who know this city’s housing stock block by block.
Common CWS Windows & Doors Problems We Solve in Oakland Park
- Salt-humidity frame corrosion on CWS 6000 series single hungs. Aluminum frames four miles from the Atlantic take a beating in Oakland Park. Years of salt-laden humidity settle into the frame tracks, the sash binds, and the balance shoe snaps. We see this on half the CWS 6000 units we open up in Lloyd Estates and around Northeast 38th Street.
- Failed weatherstripping on CWS horizontal roller windows. Broward’s summer storms drive rain sideways, and worn CWS 7000 series weatherstripping lets water walk right into the wall cavity. Once the inner seal is gone, you get wet drywall, mold, and an insurance headache.
- Cracked corner welds on CWS 7000 series horizontal rollers. HVHZ wind-load cycling flexes aluminum frames at the corners. On older 7000 series units, the welds are the first thing to fatigue. A cracked corner weld means the frame loses its structural grip on the rough opening, and that’s a replacement, not a patch job.
- Fogged insulated glass in CWS picture windows. After a decade of South Florida heat and humidity, the desiccant inside the sealed glass unit gives out. Oakland Park’s inland sun bakes these units, and once fog appears, the glass is dead. You can’t clean it out. The unit needs replacement.
- Jalousie windows sharing walls with CWS units. This is an Oakland Park specialty. Homes built between 1950 and 1970 often have a mix of original jalousies and later CWS replacements. The jalousies can’t be brought to code, and they drag down the whole home’s insurance standing.
CWS Service in Oakland Park: What Local Conditions Mean for Your Equipment
Here’s the thing most CWS repair guides won’t tell you. Oakland Park is one of the few Broward cities where whole blocks of Lloyd Estates still have jalousie windows on every bedroom. A jalousie window is the louvered glass style that was everywhere in mid-century South Florida. It cannot be retrofitted to meet HVHZ standards. Citizens Insurance and many private carriers now flag them as automatic coverage disqualifiers. So if you call us to fix a corroded CWS 6000 series single hung, and there’s a jalousie in the bedroom next to it, repairing just the CWS unit buys you nothing. The insurance company won’t care. The house still fails. What we often end up doing is quoting a whole-house Impact Windows - Oakland Park package: CWS 7000 series single hungs to replace the broken CWS units, plus full replacement of every jalousie. That’s the difference between Oakland Park work and what you’d see in a newer Broward suburb. Upgrades here are all-or-nothing by design.
CWS Models & Products We Service in Oakland Park
We service the CWS 6000 Series single hung, the CWS 7000 Series horizontal roller, the CWS 8000 Series casement, and the CWS 9500 Series sliding glass door. When a unit is still under warranty, we use OEM CWS parts to keep the coverage intact. For older models where CWS no longer manufactures parts, we source aftermarket balances, rollers, and weatherstripping that match or beat the original specs. If you’ve got a pre-2000 CWS frame with deep corrosion or a failed seal, we’ll tell you straight: repair money is wasted on those. Oakland Park’s HVHZ code and insurance pressure make full-frame replacement the better financial call. We stock common CWS hardware locally so most Oakland Park service calls don’t wait on a parts shipment.
CWS Service Pricing in Oakland Park
CWS repair pricing in Oakland Park depends on what failed and whether we’re preserving a warranty or replacing a dead frame. Minor hardware work, like a balance shoe or roller swap on a 7000 series, runs on the lower end. Full-frame Oakland Park Window Installation for a CWS 6000 single hung in a CBS wall runs higher because we’re reframing the rough opening and anchoring to HVHZ standards. Our free estimate gives you a written line-item breakdown before any work starts. No change orders, no vague allowances. We also offer $40 off any repair over $200, a free second opinion on any written estimate, no trip charge inside our home county, and a permanent 10% discount for seniors and veterans. Call (904) 747-8989 for exact pricing on your CWS unit.
Serving Oakland Park, FL - Our Local Coverage Area
We’re based in the Oakland Park area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - CWS Windows & Doors in Oakland Park
It depends on the frame’s condition and what else is on that wall. If the CWS sash binds from corrosion but the frame is sound and the opening is already HVHZ-compliant, we can repair it with OEM or aftermarket parts. If the frame has cracked welds or severe salt corrosion, Oakland Park’s HVHZ requirements make full-frame replacement the only code-compliant path. If there’s a jalousie anywhere in the house, the whole home gets treated as non-compliant. Call (904) 747-8989 and we’ll assess what you actually need, not what’s easiest to sell.
No. Jalousie windows cannot be retrofitted to meet HVHZ standards, and keeping even one means your home fails insurance inspection. That’s not a preference question; it’s a hard code and underwriting rule. Any upgrade plan for that situation is a whole-house scope. Call (904) 747-8989 for a full-home impact quote and we’ll map out every opening.
Yes. We use OEM CWS parts on warranty-sensitive repairs to keep your coverage valid. Being independent means we’re not restricted by a manufacturer’s program rules, but we respect them when it protects your warranty. If a warranty claim makes more sense than a paid repair, we’ll tell you that too. Call (904) 747-8989 and we’ll figure out the least expensive path.
For most CBS homes from that era, the CWS 7000 Series single hung is the practical choice. It carries Miami-Dade NOA, handles HVHZ wind loads well, and fits the rough openings we typically reframe in those older block walls. The 6000 Series is also workable, but if the home sits on a corner or faces open exposure, we lean toward the 7000’s stronger corner construction. Call (904) 747-8989 and we’ll recommend a model after we see your openings and your exposure.
Oakland Park sits about four miles from the Atlantic, and the salt-laden humidity travels that far with ease. Aluminum frames absorb that salt over years, especially where the factory coating has worn at the corners and sill tracks. Once salt gets into the aluminum, it corrodes from the inside, which is why a CWS frame that looks fine on the outside can be hollowed out where you can’t see it. Inland Broward cities get less of that airborne salt. Call (904) 747-8989 if you suspect corrosion, because waiting turns a repair into a replacement.
Service Areas Near Oakland Park
In addition to Oakland Park, we provide CWS sales & service throughout surrounding Broward County communities. Our Oakland Park service area coverage extends to CWS service in Wilton Manors, CWS service in Fort Lauderdale, Lauderdale-by-the-Sea, and Pompano Beach. Same crews, same trucks, same 36500-Day Done Right Promise.
Book Your CWS Service in Oakland Park Today
If your CWS window or door is failing, call (904) 747-8989. We’ll talk through what’s wrong, what Oakland Park’s HVHZ rules require, and what a repair or replacement will cost, before you commit to anything. My name’s on the truck. That’s the only guarantee you need. The one down the road.
Written by Ed Winslow, Owner at Winslow Windows & Doors, serving Oakland Park since 2011.
Six Reasons Homeowners Choose Winslow Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.










Before
After
Before
After
Before
After