Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterES Windows Window Replacement: The Fort Lauderdale Owner’s Guide
ES Windows window replacement in Fort Lauderdale typically runs $450-$1,400 per window installed, depending on the series, size, and whether you’re replacing the sash, the glass unit, or the full frame. We stock ES Windows-compatible parts on our trucks and can usually complete the swap same-day once we’ve confirmed your model. Most homeowners discover the problem the hard way: a window that won’t close after a storm, condensation fogging between the panes, or a crank handle that spins without moving the sash. Sometimes it’s quieter than that, a draft you can’t quite place or a lock that stopped engaging. By the time you notice, the part’s been failing for months. That’s normal for South Florida. Salt air, humidity, and hurricane cycles are hard on window hardware, and ES Windows parts, as well-built as they are, still have a service life. Our job is to get yours matched and replaced before the next storm season tests it.
One thing to be clear about: Winslow Windows & Doors is an independent, locally owned service provider. We’re not affiliated with ES Windows the manufacturer, but we’ve installed and serviced their product lines for years, and Ed Winslow grew up in Miami learning that coastal weather doesn’t forgive a bad install. If your ES Windows product is failing, we’ll tell you honestly whether the part can be replaced or whether the whole window has reached the end of its run.
Which ES Windows Models This Applies To
ES Windows makes several series that show up regularly in Fort Lauderdale homes, and each one uses different hardware and glass specifications. The most common we see are the impact-rated aluminum and vinyl lines, particularly in homes built or renovated after 2005 when Broward County’s stricter wind codes pushed builders toward stronger glazing. The compatibility gotcha for ES Windows owners is this: their sashes and balances are series-specific. A balance from an ES Windows 7800 series won’t mate correctly with a 7000 series frame, even if the visible dimensions look close. We’ve seen homeowners buy a part online based on a rough measurement, only to find it’s off by three millimeters and binds the first time they try to open it.
Here’s how to identify what you have. Look for a label on the inside edge of the sash or the head of the frame. ES Windows typically etches or stickers a manufacturing code that includes the series number and the glass makeup. If the label’s faded or painted over, measure the visible glass width and the overall sash thickness, then call us at (904) 747-8989 and we’ll walk through identification from your description. For the glass itself, in Fort Lauderdale we strongly recommend staying with impact-rated laminated units that match or exceed what the original ES Windows product shipped with. Cheaper aftermarket single-pane or non-impact glass saves money on parts and costs you later in insurance headaches and storm performance. There are good aftermarket equivalents for hardware, balances, rollers, and locks, often from the same suppliers ES Windows uses. But for glass, match the original spec. Your roof over your head depends on it during a storm, and your insurance company may check.
Signs Your ES Windows Window Replacement Is Failing
- Condensation or haze between the panes. The seal on a double-pane ES Windows glass unit has failed, which is common in Fort Lauderdale after 10-15 years of coastal humidity. Once the desiccant inside the spacer is saturated, the only fix is replacing the insulated glass unit. You can’t clean between the panes.
- The window won’t stay open, or it’s suddenly heavy to lift. The balances (the spring-loaded mechanisms inside the frame) have worn out. ES Windows uses a specific balance type per series, and the wrong replacement will make the sash feel mushy or snap shut on your fingers.
- The crank turns but the sash doesn’t move. Stripped gear in the operator, or a disconnected arm, on an ES Windows casement or awning window. The operator is replaceable, but you need the correct drop-in unit; our techs carry the common ES Windows operators and gears in the truck.
- Drafts around the frame, even when locked. Worn weatherstripping, or the sash has dropped on its hinges and no longer compresses against the seal. In Fort Lauderdale, this is also where you discover water intrusion you never saw because it only leaks in a driving rain.
- The lock won’t catch, or it engages but the sash still rattles. The keeper has shifted or the lock body is worn. On impact-rated ES Windows, a window that doesn’t lock is literally a window that isn’t performing as rated. In a 150-mph wind event, that’s a structural problem, not a convenience issue.
Replacement Cost & What’s Included
For Fort Lauderdale, here’s what we typically see on ES Windows replacements. A sash replacement (glass and frame insert, not the outer frame) runs $450-$750 installed for a standard double-hung or casement. A full-window replacement with frame removal runs $800-$1,400 per opening, depending on the size and whether it’s impact-rated glass and what the existing substrate looks like once we open the wall. An insulated glass unit replacement alone, the most common repair we do, is $200-$450 per pane depending on size and whether it’s laminated impact glass or pre-2020 non-impact construction.
Every estimate we write is line-itemed, fixed, and includes the part, labor, disposal, and a workmanship warranty that matches our standard: if it’s not done right, we make it right under the 36500-Day Done Right Promise. No change orders halfway through. If you’re over 65 or a veteran, the 10% permanent discount comes off the top. And if you’ve already got a written estimate from another company, Ed will give you a free second opinion.
DIY or Call Us?
There are two things an ES Windows owner can safely check without calling us: the visible weatherstripping (is it cracked or missing) and the label (to tell us your series). Everything beyond that gets into tension-loaded balances and sealed glass units, and those are the parts that hurt people. A balance cartridge under tension can release fast enough to break a finger, and an impact-rated laminated glass unit is heavy enough that a solo swap usually ends with a dropped sash and a cracked frame. We’ve seen both. The honest answer is that this is not a YouTube job, especially on ES Windows impact products where the installation torque and shimming actually matter for storm performance. If you’re not sure what’s failing, call us at (904) 747-8989. We’ll identify it over the phone, and if it’s a quick visual check, we’ll tell you that too, no charge for the honesty.
FAQs
Most ES Windows hardware lasts 8-15 years in Fort Lauderdale’s coastal climate, with balances and weatherstripping failing earliest. Glass units typically last 10-20 years before the seal fails and haze appears between the panes.
Yes, in many cases. Balances, operators, gears, locks, and weatherstripping can be replaced without replacing the whole window. We repair whenever it’s honest to do so, and we’ll tell you when replacement is the better long-term call. Call (904) 747-8989 and we’ll walk through what you’re seeing.
A standalone sash or glass replacement usually takes one to two hours once the part is matched. A full-window replacement takes half a day per opening. If we’re matching a part from the truck, we can often schedule you same-day in Fort Lauderdale.
We stock common ES Windows parts on our service trucks, including balances, operators, gears, locks, and standard glass units. Unusual series or custom sizes may need a manufacturer order, which typically arrives within five to seven business days.
Ed’s name is on the truck. That’s the only guarantee you need.
Contact Winslow Windows & Doors
If your ES Windows product is failing, call (904) 747-8989 and a live person will answer, day or night. We’ll identify what you have, quote a fixed price, and schedule the replacement around your life. Free estimates, no trip charge inside the home county, and a permanent 10% discount for seniors and veterans. Winslow Windows & Doors is locally owned and operated by Ed Winslow, in business since 2011, and authorized to install PGT, CGI, CWS, ES Windows, ECO Window Systems, Mr-Glass, Therma-Tru, and ViewLux products. A neighbor you can call at 2 a.m. - and someone will actually answer.
Written by Ed Winslow, Owner, Winslow Windows & Doors at Winslow Windows & Doors, serving Fort Lauderdale and nearby areas.
Six Reasons Homeowners Choose Winslow Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.