ECO Window Systems Custom & Geometric Windows Nationwide | Winslow Windows & Doors

ECO Window Systems Custom & Geometric Windows in Fort Lauderdale: What to Know First

ECO Window Systems custom and geometric windows in Fort Lauderdale are specialty installations that require exact framing, precision glazing, and real experience with shaped openings. As an independent ECO Window Systems service provider, we handle arched, curved, angled, and oversized window work on homes from Victoria Park to Coral Ridge, with most custom window projects completed in two to four weeks depending on glass fabrication. Call (904) 747-8989 for a free estimate, and we’ll walk you through what your specific opening actually needs.

Call (904) 747-8989

This page is for Fort Lauderdale homeowners who already own ECO Window Systems products, or who are considering them for a shaped or oversized opening. Ed Winslow has been putting windows into South Florida homes since 2011, and his name is on the truck. That’s the only guarantee you need.

Key Takeaways:

• We service and install ECO Window Systems custom, geometric, arched, and curved windows across Fort Lauderdale. We are not a factory service center, but we know these products on the job-site level.
• Shaped windows in coastal South Florida fail differently than rectangles. Salt air, pressure differentials, and settling concrete all hit radius frames harder.
• Most ECO custom window repairs are done in a single visit once glass is in hand. The delay is usually glass fabrication, not the installation itself.
• Free estimates, written line-item pricing, no change orders without your sign-off, and the 36500-Day Done Right Promise.

How ECO Window Systems Products Fail - and How We Fix Them

Any window can fail. But Fort Lauderdale punishes shaped windows faster than standard rectangles, because the stress loads on a radius frame or an angled corner don’t distribute the way they do on a square. We see the same patterns on ECO jobs across the city, and we fix them at the source rather than caulking over the symptom.

• Radius frame seal separation on T-700 series arched units. The seal between the curved frame extrusion and the glass pack starts pulling away, usually after several wet-dry seasons. Salt from ocean air gets into the channel and accelerates it. We remove the glass, re-bed it, and replace the setting blocks and gaskets rather than just smearing sealant on the outside, which is what we often find from prior handymen.
• Snowflake and geometric-fixed units taking water at the bottom corners. These are fixed windows with multiple mitered frame joints. Water doesn’t come through the glass. It comes through a miter joint that was sealed but not properly back-caulked at installation. We disassemble the corner, clean the joint, and rebuild it with a two-part sealant rated for South Florida UV and salt exposure.
• Condensation between panes on ES impact-rated geometrics. This is a failed insulated glass unit seal, not a house humidity problem. If the window is more than five years old, the desiccant inside the spacer has likely saturated. We measure the exact radius and angle, order an IGU with the correct spacer thickness for the original frame, and install it with the pressure plate alignment the opening was designed for.
• Oversized sliders binding on the track after concrete settlement. Fort Lauderdale sits on limestone and reclaimed land. Slab movement is common, especially in older neighborhoods near the Intracoastal. A large ECO horizontal roller - the kind used in a wide geometric opening - will start dragging and the rollers will flat-spot. We re-square the frame within tolerance, replace the roller hardware with the correct load rating for the panel weight, and adjust the interlock so the operable sash seats properly.
• Impact laminate clouding at the edge of shaped units. You’ll see this as a foggy band along the frame edge of an impact window. It’s not seal failure from the outside. It’s moisture getting pulled into the laminate interlayer because the edge seal is under tension on a tight radius. We document it, replace the glass with a properly edge-tensioned IGU, and often adjust the frame glazing channel so the new unit isn’t fighting the curve.

Our ECO Window Systems Custom & Geometric Windows Process

We run every ECO Window Systems job the same way, whether it’s a single arched transom in Harbordale or a full wall of geometric glass in a Bay Colony remodel. Here’s what happens after you call (904) 747-8989.

1. 1
   Call and schedule the site visit. A live person answers, 24/7. No phone tree. We find a time that works, and there’s no trip charge inside Broward County.
2. 2
   Inspection and measurement. We measure every side of the opening, including diagonal throw on trapezoids, true radius on arches, and frame depth for glass pack thickness. We also check the structural condition of the buck and rough opening.
3. 3
   Diagnosis and parts decision. Ed or a senior tech identifies the root cause. We’ll recommend OEM ECO Window Systems glass and hardware where warranty preservation matters. For out-of-warranty units, we’ll tell you honestly when a quality aftermarket IGU with correct spacer and laminate specifications will perform the same for less money. You decide.
4. 4
   Written quote. Line-item pricing, fixed at the number on the paper. No change orders unless the opening reveals something nobody could have seen from the outside, and we walk you through that before anything changes.
5. 5
   Repair or install. Background-checked, uniformed techs do the work. We protect the floors, remove and haul old glass, and clean up before we leave. Every impact unit gets checked at the frame-to-wall seal, because in Fort Lauderdale the window is only as good as the waterproofing around it.
6. 6
   Test and sign-off. We operate every sash, check the locks, spray-test where water entry was the complaint, and walk you through what we did. The 36500-Day Done Right Promise applies from that moment.

What ECO Window Systems Custom & Geometric Windows Costs in Fort Lauderdale

Here’s the honest range for the work we do most often. These are for Fort Lauderdale and the immediate surrounding area. Your exact quote depends on glass size, impact rating, frame condition, and whether we’re repairing an existing unit or building out a new opening.

• Replacement insulated glass unit, arched or radius, impact-rated: $600 to $1,800 depending on glass area and lamination spec.
• Replacement IGU for a geometric fixed unit (triangle, trapezoid, pentagon): $450 to $1,500. Custom shape cutting is the main price variable.
• Full frame replacement, custom arch or curved window, new construction: $2,800 to $7,500 per opening, including waterproofing and interior trim work.
• Track and roller rebuild on an oversized ECO slider: $350 to $900, parts included unless the panel needs reglazing.
• Seal rebuild on a radius frame corner or miter joint: $250 to $600 per joint, depending on access and how much disassembly is required.
• Labor for a standard single-window repair without glass: $180 to $400.

What moves the price: glass area, shape complexity (a radius costs more to cut and temper than a straight line), impact rating level, second-story access, and whether the original frame is still structurally sound. Call (904) 747-8989 and we’ll give you a written number before you commit to anything. The estimate is free.

Why Fort Lauderdale Homeowners Call Winslow Windows & Doors for ECO Window Systems Work

Because we’re the one down the road. Ed Winslow grew up in Miami, trained in building construction technology at Miami Dade College, and has been putting windows in South Florida homes since 2011. We’ve handled shaped and oversized glass from older houses near Las Olas Boulevard to newer construction east of US-1, and we know what Fort Lauderdale’s salt air and summer thunderstorms do to a window that wasn’t sealed right.

Every call is answered by a human being. Every tech who shows up is background-checked and in uniform. We hold licenses and carry insurance. And if the job isn’t done right, the 36500-Day Done Right Promise means we come back and make it right. That’s how we’ve stayed in business for over 15 years in a market full of faceless installers.

We work on ECO Window Systems every week, but we also install PGT, CGI, CWS, ES Windows, Mr-Glass, Therma-Tru, and ViewLux. That matters for one simple reason: when we recommend a repair instead of a replacement, it’s because the window actually warrants the repair. It’s the same advice we’d give a neighbor. Because Ed’s name is on the door, and on every job we do.

FAQs