Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterECO Window Systems Shingle, Tile & Metal Roofing in Fort Lauderdale: What to Know First
ECO Window Systems shingle, tile and metal roofing in Fort Lauderdale is specialized work, and we handle it as an independent ECO Window Systems service provider. Most roofing jobs tied to ECO Window Systems products involve integration points: flashing around impact-rated frames, sealing transitions where roof decking meets window openings, and repairing water intrusion that starts at the roofline and travels down. Typical turnaround is one to three days depending on roof scope. If you own a home in Fort Lauderdale with ECO Window Systems windows or doors and you’re looking at roof work, call (904) 747-8989. We’ll give you a straight answer and a free estimate.
How ECO Window Systems Products Fail - and How We Fix Them
Every brand has its own fingerprints when something goes wrong. Here’s what we actually see on ECO Window Systems jobs in Fort Lauderdale, and what we do about it.
- Flashing separation at the head of ECO 5500 Series windows. South Florida heat cycles bake the sealant between roof drip edges and the window head flashing. Water gets behind the flashing and follows the frame down. On Fort Lauderdale homes with shingle roofs, we regularly see this after five to seven summers. The fix is removing the old flashing, resetting it with proper overlap under the shingle course, and re-sealing with a UV-stable polyurethane we trust in salt air.
- Tile roof debris abrading ECO Window Systems frame coatings. Barrel tile roofs in neighborhoods like Rio Vista and Victoria Park shed small ceramic fragments during every storm. Those fragments collect in the gap between the tile edge and the window frame. Over time, wind-driven grit sandblasts the factory finish off the frame’s lower corners. We clean the gap, install a low-profile debris guard where the roof meets the frame, and touch up the finish so corrosion doesn’t get a start.
- Metal roof expansion pushing against ECO door thresholds. Standing-seam metal roofs expand and contract dramatically under a Florida sun. Where a metal panel terminates near an ECO sliding door or French door, the panel can press against the threshold flashing. That constant movement eventually cracks the seal. We refit the panel clearance, install a proper expansion joint, and reset the threshold flashing so the door stays square and dry.
- Improperly flashed ECO picture windows under re-roofs. We get called out after a lot of third-party roof replacements. The roofer flashed the window with generic step flashing that doesn’t match the ECO frame profile. Water pools at the sill, and the homeowner notices peeling paint or a musty smell months later. We remove the incorrect flashing, fabricate or source correctly profiled flashing for that specific ECO series, and re-seal the entire perimeter.
- Failed weep system on ECO horizontal sliders near roof valleys. In a heavy Fort Lauderdale downpour, roof valleys dump water fast. If the window’s weep holes get blocked by roofing tar or paint from an earlier roof job, the frame channel fills and water runs inside. On ECO series with internal weep channels, we clear the channels, verify they drain with a water test, and install small weep covers so the problem doesn’t return.
Our ECO Window Systems Shingle, Tile & Metal Roofing Process
Here’s how a job goes when you call us about ECO Window Systems roofing work in Fort Lauderdale.
- 1
You call and a live person answers. That’s not a call center. It’s our office, 24/7. We ask what you’re seeing, where the water is, and when it started.
- 2
We inspect the intersection points. Ed Winslow or one of our background-checked techs comes out and looks at how your roof meets every ECO window and door. We don’t guess from the driveway.
- 3
We give you a written line-item quote. No vague “roof repair” line. You’ll see exactly what we’re doing and what it costs before we start.
- 4
We make the parts call with you. If a part needs replacing, we talk through OEM-versus-aftermarket honestly. Some ECO parts are worth the factory price. Others have a quality aftermarket equivalent that saves real money.
- 5
We do the work and test it. Roof sealed, flashing set, weep channels cleared. Then we run a water test if feasible so you’re not the one discovering a problem next storm.
- 6
We stand behind it. Every job carries the 36500-Day Done Right Promise. If it’s not done right, we come back and make it right. That’s Ed’s word, and it’s in writing.
What ECO Window Systems Shingle, Tile & Metal Roofing Costs in Fort Lauderdale
Honest numbers help you plan. Here’s what we typically see in Fort Lauderdale for roof work tied to ECO Window Systems products.
- Flashing repair around a single ECO window or door: $280-$650, depending on whether we’re resetting existing flashing or fabricating new profiled flashing.
- Full perimeter re-flashing on a picture window or slider after a bad roof job: $900-$2,100, including removal of the incorrect flashing and re-sealing.
- Roof-to-wall transition repair where ECO frames meet tile or metal roofing: $600-$1,800, depending on linear feet and roof type.
- Weep system clearing, testing, and cover installation per window: $140-$320.
- Debris guard installation along roof-to-frame gaps: $18-$35 per linear foot.
What moves the price: roof type (tile and metal require more careful flashing work than shingle), how much of the existing flashing is reusable, and whether we find hidden rot or corrosion behind the old work. We’ll always tell you before adding a dollar. Call (904) 747-8989 for a free estimate. We also offer a free second opinion on any written estimate you’ve received, and $40 off any repair over $200. Seniors and veterans get 10% off, every job, no expiration.
Why Fort Lauderdale Homeowners Call Winslow Windows & Doors for ECO Window Systems Work
Ed Winslow grew up in Miami and trained in building construction technology at Miami Dade College. He learned early that South Florida weather doesn’t give you a second chance on a bad installation. That’s why our techs are trained on the specific integration points between roofing systems and impact-rated window and door frames. We service eight authorized brands: PGT, CGI, CWS, ES Windows, ECO Window Systems, Mr-Glass, Therma-Tru, and ViewLux. If your home has mixed brands, we handle them all in one visit. Every tech is background-checked and arrives in uniform, so you know exactly who’s at your door before they knock. We’ve been locally owned and operated in our communities since 2011, with a published address and license number. My name’s on the truck. That’s the only guarantee you need.
FAQs
No. We’re an independent ECO Window Systems service provider, and the roofing and flashing work we do around the frames doesn’t alter the window structure itself, so the ECO warranty stays intact. In fact, leaving a flashing leak unaddressed is what causes the kind of damage manufacturers won’t cover. Call (904) 747-8989 if you want us to check what’s happening before it gets worse.
Sometimes yes, sometimes no, and we’ll tell you which is which before we order anything. For structural components that affect the window’s impact rating or weather seal, we recommend OEM ECO parts. For non-structural pieces like weep covers, drip caps, and some flashing profiles, a quality aftermarket part often does the job at a better price. We give you both options and the honest trade-off.
We answer the phone 24/7, and in most cases we can schedule an inspection within a day or two. Roof-to-window leaks don’t always wait, so we prioritize active water intrusion cases. If you’re inside the county, there’s no trip charge for us to come out and look. Call (904) 747-8989.
If the roof itself is failing, replacement is usually the better long-term play, and we’ll make sure the new roof is flashed correctly around every ECO frame from day one. If the roof is sound and the problem is isolated to the flashing or seal points around the windows, a targeted repair makes sense. We’ll tell you honestly which camp you’re in.
No. Our quotes are line-item and fixed. If we open up a flashing point and find rot or corrosion we couldn’t see from the outside, we stop, show you what we found, and give you a revised number before touching anything else. You approve it or you don’t. The price on the page is the price you pay.
Written by Ed Winslow, Owner, Winslow Windows & Doors at Winslow Windows & Doors, serving Fort Lauderdale and nearby areas.
Six Reasons Homeowners Choose Winslow Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.