Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterHorizontal Roller Windows in Fort Lauderdale, FL
Horizontal roller windows slide open left to right on a track, making them one of the most practical window styles for Fort Lauderdale homes where casement cranks corrode in the salt air and double-hungs don’t give you enough ventilation. A quality impact-rated horizontal roller can be installed in a single day as part of our Window Installation service, meets Florida Building Code requirements for wind-borne debris regions, and starts around $350 per window installed – depending on size, glass package, and frame material. If you’re ready to talk options, call us at (904) 747-8989 and a real person will pick up, any hour of the day.
At Winslow Windows & Doors, Ed Winslow has been installing horizontal rollers across Fort Lauderdale since 2011. We’re an authorized installer for CGI, CWS, and ES Windows – three brands that engineer specifically for South Florida’s coastal conditions – and every job is backed by our 36500-Day Done Right Promise. That’s not a typo: if it’s not done right, we come back and make it right. Period. For more about our full installation approach, visit our Window Installation in Fort Lauderdale page.
Ed’s name is on the door, and on every job we do. That’s the difference between calling a national chain and calling a neighbor who’s been working these streets for over 15 years.
When You Need Horizontal Roller Windows
Not every home is a candidate for a roller window, but for a lot of Fort Lauderdale properties – especially those built in the 1970s through early 2000s – they’re the natural fit alongside Picture & Fixed Windows. Here are the situations we see most often:
- Your existing aluminum sliders are letting in rain or air. Single-pane aluminum rollers from the 1980s were never built for what Fort Lauderdale storms demand. If you’re toweling up the sill after every squall, the seals and tracks are shot and a full replacement is almost always more cost-effective than patching.
- You need impact protection but don’t want to deal with shutters every season. In neighborhoods like Lauderdale Lakes and Tamarac, we see a lot of homeowners who are done hauling panels out of the garage every June. Impact-rated horizontal rollers give you permanent protection – no seasonal labor, no storage headache.
- Your home has a wide, low opening that suits a sliding style. Bedrooms or living rooms with wide openings near grade level are a natural fit for rollers. A casement wouldn’t give you the unobstructed glass area; a horizontal roller does.
- Your HOA or condo association restricts outward-opening windows. Several Fort Lauderdale-area associations, particularly along the Intracoastal, prohibit windows that swing outward over common areas or landscaping. Horizontal rollers stay within the plane of the wall.
- You’re renovating and want to bring your windows into current energy code. Florida’s energy code has tightened considerably since 2011. If your home still has clear single-pane glass, replacing with a low-e horizontal roller can cut solar heat gain by 30 to 50 percent – a real difference when you’re running the AC nine months of the year.
- The tracks are bent, cracked, or the window simply won’t lock. A window that doesn’t lock isn’t a minor annoyance in Fort Lauderdale – it’s a code issue and a vulnerability. When the track or latch mechanism is damaged beyond a simple repair, replacement is the right call.
Our Horizontal Roller Windows Process
We don’t show up with a generic quote and a vague timeline. Here’s exactly what happens from the first call to the final inspection:
- Free on-site measurement and assessment. One of our background-checked, uniformed technicians visits your Fort Lauderdale home, measures every opening, checks the rough frame condition, and photographs the existing window. No trip charge inside Broward County. We look at factors like wall thickness, impact zone classification, and whether the existing frame can be used for a pocket installation or needs full demolition.
- Product selection and upfront written quote. Based on the site visit, we walk you through which CGI, CWS, or ES Windows horizontal roller fits your opening, your budget, and your code requirements. You get a written quote with line-item pricing before anything is ordered. Upfront pricing. No surprises on the invoice.
- Permit filing (when required). Fort Lauderdale requires a building permit for window replacements that change the opening size, structural framing, or product type. We handle the filing with the City of Fort Lauderdale Building Services Division. Impact window installations also require a Notice of Commencement in most cases – we prepare that too. You don’t have to navigate the permit portal yourself.
- Factory order and scheduling. Impact-rated horizontal rollers are custom-manufactured to your exact rough opening dimensions. Lead times from our authorized brands typically run three to five weeks depending on product line and current production schedules. We confirm your installation date as soon as the windows clear the factory.
- Installation day. Our crew arrives in uniform on the agreed date. For a standard single-family Fort Lauderdale home with six to ten windows, most installations wrap in one day. We remove the old windows carefully, set the new units level and plumb, apply the appropriate sealant for Florida’s humidity and UV exposure, and test every lock and roll before we pack up. All debris is hauled away – we don’t leave old frames on your lawn.
- Final inspection and sign-off. For permitted work, a City of Fort Lauderdale inspector verifies the installation against the approved permit drawings. We coordinate the inspection appointment and make sure you have a copy of the signed-off permit card for your records – useful when you sell the home or file an insurance claim.
Horizontal Roller Windows Pricing in Fort Lauderdale
Horizontal roller window pricing in Fort Lauderdale ranges from about $350 to $950 per window installed, depending on size, glass type, and frame specification. Impact-rated units – which are effectively mandatory in Broward County’s wind-borne debris region – sit at the higher end of that range, but they also eliminate the cost of accordion shutters or panels entirely.
Here’s a realistic breakdown of what drives the final number:
- Window size: A standard 36″ x 24″ horizontal roller costs less than a wide-format 72″ x 36″ unit. The glass area and frame length both affect material cost directly.
- Impact vs. non-impact glass: Non-impact clear glass is available but rarely advisable in Fort Lauderdale without a separate shutter system. Laminated impact glass adds $80 to $180 per unit over standard insulated glass, depending on thickness and interlayer type.
- Low-e coating and gas fill: Low-e coatings reduce solar heat gain and ultraviolet transmission. In Fort Lauderdale’s climate, this is almost always worth the upgrade – payback through reduced cooling costs typically runs three to seven years. Adding argon fill between panes improves the insulation value further.
- Frame color and finish: Standard white and bronze are stock colors. Custom powder-coat finishes add cost and lead time.
- Installation complexity: Stucco exteriors, second-floor locations, or openings that need structural header work add labor time and affect the final price.
- Permit fees: City of Fort Lauderdale permit fees for window replacements typically run $75 to $250 depending on the number of units and project valuation. We include these in the written quote so you see the full number, not a surprise at closing.
| Window Type | Typical Installed Cost (per unit) |
|---|---|
| Standard horizontal roller, non-impact | $350 – $550 |
| Impact-rated horizontal roller, standard low-e | $550 – $750 |
| Large-format impact roller (60″ wide or more) | $750 – $950+ |
| Permit fee (City of Fort Lauderdale) | $75 – $250 (project-dependent) |
We offer $40 off any repair or replacement order over $200, a 10% discount for seniors and veterans (always available, not a limited-time promotion), and a free second opinion if you have a written estimate from another contractor. Call (904) 747-8989 for an exact quote – estimates are always free, and we don’t charge a trip fee inside Broward County.
Why Fort Lauderdale Homes Specifically Benefit from Impact-Rated Rollers
Fort Lauderdale sits in Broward County’s High-Velocity Hurricane Zone (HVHZ), which is the most stringent wind-load classification in Florida’s building code. Windows installed in HVHZ must meet Florida Product Approval under Chapter 16 of the Florida Building Code – that means tested and certified for large-missile impact, cyclic pressure, and water infiltration. Not every horizontal roller on the market qualifies. The CGI and CWS units we install carry Florida Product Approval numbers specifically validated for HVHZ conditions, so you won’t get a stop-work order mid-project or fail a final inspection because the product wasn’t rated for your zone.
Beyond storm protection, Fort Lauderdale’s salt-air environment is genuinely hard on window hardware. The Intracoastal corridor from Rio Vista down to Lauderdale-by-the-Sea sees accelerated corrosion on standard hardware and aluminum frames that aren’t marine-grade anodized. The horizontal rollers we source from ES Windows use stainless-steel hardware and a marine-grade frame treatment that holds up through years of salt exposure without pitting or seizing. We’ve replaced enough corroded rollers in Las Olas Isles to know the difference the right material specification makes.
There’s also the question of insurance. Many Fort Lauderdale homeowners are carrying Citizens Property Insurance or a private wind policy with significant premium credits available for verified impact openings. A properly permitted and inspected horizontal roller installation, with the product approval on file, supports an opening protection discount that can reduce annual wind premiums meaningfully. We provide the documentation your insurer needs.
Brands We Install for Horizontal Roller Windows
For horizontal roller windows in Fort Lauderdale, we draw most often from CGI, CWS, and ES Windows. Each has strengths worth knowing.
CGI has been manufacturing impact products in South Florida since 1992 and builds its Series 100 and 150 horizontal rollers specifically for Florida’s HVHZ. The multi-point locking system and the precision-extruded track are noticeably tighter than what you’ll find from brands that treat Florida as an afterthought.
CWS (Custom Window Systems) manufactures in Ocala, Florida, which means faster lead times than products coming from out-of-state factories. Their horizontal roller line covers a wide range of opening sizes and carries Florida Product Approval for both HVHZ and standard wind zones, making them a versatile choice when a project includes Single & Double Hung Windows and other styles.
ES Windows is a Florida-founded manufacturer with particular strength in the Broward County market. Their horizontal rollers use a thermally broken frame option that reduces heat transfer at the frame perimeter – useful in Fort Lauderdale west of I-95 where homes get direct western sun exposure and frame conductivity is a real energy-efficiency factor.
Ed Winslow selects the product line for each project based on the opening specifications, the homeowner’s energy and security goals, and the current production lead time. We never push a brand because of margins – we push the brand that fits the job.
Key Takeaways
- Horizontal roller windows are a practical, code-compliant choice for Fort Lauderdale homes, especially where outward-swinging styles aren’t allowed or where corrosion is a concern.
- Installed costs run roughly $350 to $950 per unit depending on size, impact rating, and glass package – with permit fees included in every written quote we provide.
- Fort Lauderdale’s HVHZ classification means impact-rated products with a valid Florida Product Approval number are effectively required. We install brands that meet that standard.
- Winslow Windows & Doors has been serving Fort Lauderdale since 2011. Ed Winslow is the owner and his name is on every job.
- Every installation is backed by the 36500-Day Done Right Promise. If it’s not right, we make it right.
- Seniors and veterans receive a permanent 10% discount. No expiration, no fine print.
- Call (904) 747-8989 any time – someone will actually answer.
FAQs – Horizontal Roller Windows
How much do horizontal roller windows cost in Fort Lauderdale?
Horizontal roller windows in Fort Lauderdale typically cost between $350 and $950 per window installed, with impact-rated units in the $550 to $750 range for standard sizes. The final number depends on window dimensions, glass specification (low-e, impact laminate, argon fill), and whether the rough opening needs any structural adjustment. Permit fees from the City of Fort Lauderdale add $75 to $250 to the project total. Call (904) 747-8989 for a free on-site estimate – we’ll give you a written quote with line-item pricing, no vague ranges.
Do I need a permit to replace horizontal roller windows in Fort Lauderdale?
Yes, in most cases. The City of Fort Lauderdale requires a building permit for window replacements that involve a change in product type, opening size, or structural framing – and impact window installations in the HVHZ almost always trigger that requirement. We file the permit on your behalf, coordinate the city inspection, and make sure you walk away with a signed-off permit card. You won’t have to navigate the Building Services portal yourself.
Are horizontal roller windows impact-rated for Fort Lauderdale’s hurricane zone?
Impact-rated horizontal rollers are available and, for most Fort Lauderdale homes, they’re the right choice. Broward County falls within Florida’s High-Velocity Hurricane Zone, which requires windows to carry a Florida Product Approval number validated for large-missile impact and cyclic wind pressure testing. The CGI, CWS, and ES Windows rollers we install meet that standard. A non-impact roller is still available for interior applications or where a code-compliant shutter system is already in place, but we’ll tell you plainly which option applies to your specific opening and zone classification.
How long does a horizontal roller window installation take in Fort Lauderdale?
Most single-family homes in Fort Lauderdale with six to ten windows can be fully installed in one day once the product arrives from the factory. Lead time on custom-sized impact rollers typically runs three to five weeks from the order date. The permit process runs concurrently with the factory order in most cases, so the inspection is usually scheduled within a day or two of installation. From your first call to a signed-off final inspection, the typical project timeline is four to seven weeks. Call (904) 747-8989 and we can give you a more specific timeline based on current production schedules.
Ready to Get Started?
If your Fort Lauderdale home has aging rollers that leak, corrode, or can’t pass an insurance inspection, now is the right time to find Window Installation Near Me in Fort Lauderdale, FL. Winslow Windows & Doors has been doing this work in Fort Lauderdale and across Broward County since 2011, and Ed Winslow stands behind every installation with the 36500-Day Done Right Promise. We’re locally owned, fully licensed, and insured. Our technicians are background-checked and arrive in uniform. And when you call, a real person answers – not a voicemail, not a call center.
Call us at (904) 747-8989 to schedule your free estimate. No trip charge inside Broward County, upfront pricing on everything, and the one number you’ll actually need to get the job done right.
Written by Ed Winslow, Owner at Winslow Windows & Doors, serving Fort Lauderdale since 2011.
Six Reasons Homeowners Choose Winslow Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.