Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterAwning & Hopper Windows in Fort Lauderdale, FL
Awning and hopper windows are small-format, hinged windows built for ventilation in tight or awkward spaces – bathrooms, laundry rooms, garage walls, and narrow kitchen walls where a standard double-hung simply won’t fit or won’t perform. In Fort Lauderdale’s climate, where afternoon rain hits fast and humidity never really lets up, the way a window opens and seals matters as much as what it’s made of. An awning window hinges at the top and swings outward, so you can leave it cracked during a passing shower without soaking the sill. A hopper window hinges at the bottom and tilts inward, which is why you see them in basements up north – and in Fort Lauderdale, they’re a smart choice for high bathroom placements and anywhere you want tight security with real airflow.
At Winslow Windows & Doors, we’ve been installing both styles across Fort Lauderdale since 2011 as part of our window installation services. Ed Winslow built this company on the idea that a locally owned installer should outperform any national chain on both product knowledge and accountability – and awning and hopper windows are a good test of that, because getting them right means understanding the specific wall thickness, the frame clearance, and the impact-rating requirements that Fort Lauderdale and Broward County enforce. If you’re ready to talk through your project, call us at (904) 747-8989 – a real person picks up every time, any hour of the day.
This page covers what you need to know about awning and hopper window installation in Fort Lauderdale: when these windows make sense, what the process looks like, what they cost in this market, and the questions we hear most. For the full picture of what we do with windows across every style and size, see our Window Installation in Fort Lauderdale page.
When You Need Awning or Hopper Windows
Not every opening calls for an awning or hopper, but when the situation fits-like with casement windows in certain spots-nothing else does the job as cleanly. Here are the scenarios we see most often in Fort Lauderdale homes:
- Bathroom and utility room ventilation without sacrificing privacy. Fort Lauderdale bathrooms with high-set windows are a natural fit for awning or hopper units – you get airflow and natural light at ceiling level, and nobody outside has a sightline into the room. We install these regularly in the older ranch-style homes throughout Coral Ridge and Victoria Park, where bathrooms were designed with small, fixed panes that trap moisture and breed mildew.
- Replacement of single-pane jalousie or louvered windows. Many Fort Lauderdale homes built in the 1960s and 70s still have jalousie windows that leak air, rattle in wind, and can’t pass today’s Broward County impact requirements. An awning window is a clean, code-compliant replacement that fits a similar rough opening and actually seals properly.
- Garage and workshop walls that need airflow without a security gap. Hopper windows work particularly well in garage side walls – they allow cross-ventilation during the brutal June-through-September heat but lock securely when you leave. CGI makes hopper units in impact-rated configurations that meet Florida Building Code wind-load requirements, which matters in a coastal county where inspectors take these specs seriously.
- Stairwell, lanai enclosure, or above-door transoms. Awning windows are a practical choice for tight horizontal openings above doors or along stairwells where you want airflow but the wall height is limited. We’ve installed them in several Lauderdale-by-the-Sea properties where the original fixed transoms were drafty and offered no ventilation at all.
- Pairing with larger picture or casement windows for a combined unit. Awning windows are often installed directly below or beside a large fixed picture window to give that wall a ventilation source without interrupting the view. It’s a combination we install frequently in waterfront properties along the New River and along the Intracoastal – the picture window frames the view, the awning below it moves air.
- Energy efficiency upgrades in rooms that still have single-pane glass. Fort Lauderdale electricity bills are not forgiving, and a single-pane awning or hopper window in a sun-facing wall can drive up cooling costs noticeably. Replacing it with a low-E, impact-rated unit from ES Windows or ECO Window Systems cuts solar heat gain and helps your AC work less hard through the summer months.
Our Awning and Hopper Window Installation Process
We don’t show up with a van full of generic windows and figure it out at the door. Every awning and hopper installation in Fort Lauderdale goes through the same structured process, because skipping steps is exactly how you end up with a window that leaks at the frame joint after the first tropical storm.
- In-home measurement and site assessment. Ed’s crew visits the opening, takes precise rough-opening dimensions, checks the wall depth and framing condition, and confirms the wind-load zone. Fort Lauderdale falls within a High-Velocity Hurricane Zone (HVHZ), which means the window we order has to carry the right Miami-Dade Notice of Acceptance (NOA) or Florida Product Approval number – and we verify that before anything is ordered. There’s no trip charge for this visit if you’re inside Broward County.
- Product selection and permit coordination. We’ll walk you through the options that fit your opening, your wall type, and your budget. For impact-rated awning and hopper windows in Fort Lauderdale, we work with CGI, ES Windows, and ECO Window Systems – each brand has specific series designed to meet HVHZ standards. Once you choose a unit, we handle the permit application with the City of Fort Lauderdale Building Services Division. Pulling the proper permit isn’t optional here – it protects your homeowner’s insurance and keeps your property record clean if you ever sell.
- Custom order and lead-time confirmation. Awning and hopper windows are typically ordered to the specific rough-opening dimension rather than pulled off a shelf. Lead times in the Fort Lauderdale market currently run roughly three to six weeks depending on the manufacturer and the configuration – we give you an honest timeline at the point of order, not an estimate that shifts on you later.
- Removal and framing preparation. On installation day, our background-checked, uniformed crew removes the existing window, inspects the rough opening for rot, moisture damage, or compromised framing, and repairs anything that needs attention before the new unit goes in. Fort Lauderdale’s humidity and occasional wind-driven rain find every weakness in a rough opening – addressing it before setting the new frame is the difference between a 10-year install and a 25-year install.
- Installation, sealing, and flashing. We set the new window in the opening, level and shim it to the frame, and apply the proper sealant and flashing tape per the manufacturer’s installation guide and Florida Building Code requirements. For stucco exteriors – which is most of Fort Lauderdale – we also patch and finish the exterior surround so the new unit looks like it was always there.
- Inspection and final walkthrough. After the city inspector signs off on the permit, we do a final walkthrough with you: we demonstrate the opening mechanism, confirm the lock engages fully, check the seal at every corner, and make sure you know how to clean the glass and maintain the hardware. If anything is off, we fix it before we leave. That’s the 36500-Day Done Right Promise in practice – not a marketing line, just what Ed expects from every job that carries his name.
Awning and Hopper Window Pricing in Fort Lauderdale
Awning and hopper window installation in Fort Lauderdale typically runs between $450 and $1,100 per window installed, covering the unit, labor, permit fee, and standard finishing. Here’s how cost breaks down in this market:
| Cost Factor | Typical Range (Fort Lauderdale) |
|---|---|
| Impact-rated awning or hopper window (unit only) | $280 – $650 |
| Labor per window (remove old unit, install new) | $120 – $280 |
| City of Fort Lauderdale permit fee (per window) | $60 – $150 |
| Stucco patch and exterior finish (if needed) | $40 – $120 |
| Frame repair or rot remediation (if present) | $80 – $250 |
A few things push costs higher or lower in Fort Lauderdale specifically. Impact-rated units – which are required in Broward County under HVHZ rules – cost more than standard windows, but there’s no legal or insurance-compliant alternative for exterior openings in this county. Window size matters too: a 24×20 bathroom hopper costs noticeably less than a 36×24 awning unit going above a picture window. If your existing frame has water damage (common in Fort Lauderdale homes built before 1990 that haven’t had windows touched since), add the repair cost to your estimate.
We offer upfront pricing before any work starts – no surprises on the invoice. If you’re a senior or veteran, our permanent 10% discount applies. And if you’ve already received a written estimate from another contractor, we’ll give you a free second opinion with no obligation. Call (904) 747-8989 and we’ll set up a no-cost in-home estimate, with no trip charge inside Broward County.
FAQs – Awning and Hopper Windows in Fort Lauderdale
Do awning and hopper windows meet Fort Lauderdale’s impact requirements?
Yes – impact-rated awning and hopper windows are available and required for exterior openings in Fort Lauderdale, which sits in Florida’s High-Velocity Hurricane Zone. The units we install carry Miami-Dade NOA or Florida Product Approval ratings and are tested to withstand the wind speeds Broward County’s building code specifies. Non-impact awning or hopper windows are not permitted for exterior installation without a separate storm shutter system, and we don’t install them that way – the permit process verifies compliance before final inspection. Call (904) 747-8989 and we can confirm which product approval numbers apply to your specific project.
How much does a single awning or hopper window installation cost in Fort Lauderdale?
A single impact-rated awning or hopper window installation in Fort Lauderdale typically costs between $450 and $1,100, all in – unit, labor, permit, and standard finish work. The wide range reflects window size, the condition of the existing rough opening, and whether stucco patching is needed. Multi-window projects usually bring the per-unit cost down because permit fees are consolidated and the crew is already on-site. For an exact number on your opening, call (904) 747-8989 – the estimate is free and there’s no trip charge inside Broward County.
What’s the difference between an awning window and a hopper window, and which is right for my space?
An awning window hinges at the top and swings outward at the bottom, which lets it stay open during light rain without letting water in – it’s the better choice for any exterior wall where weather is a concern. A hopper window hinges at the bottom and tilts inward at the top, making it a tighter fit for high-placed bathroom windows and interior spaces where you can’t have the sash swinging out. In Fort Lauderdale, we install awning windows most often in living areas, garages, and lanai enclosures; hoppers show up most in bathrooms and utility rooms. For spaces needing extra light and character, we also offer bay & bow windows. During your estimate visit, Ed’s crew will walk you through which orientation works best for the specific wall and location you have.
How long does the awning or hopper window installation take from start to finish?
From the first call to final city inspection, most single awning or hopper window projects in Fort Lauderdale take four to seven weeks – with the majority of that time being the manufacturing lead time after you’ve chosen your unit and the permit is submitted. The actual installation day for one or two windows typically runs two to four hours. Larger projects with multiple openings take a full day. We give you a realistic timeline at the start and don’t adjust it on you mid-project without a direct conversation. If your timeline is tight – a home sale, a rental turnover, a renovation deadline – tell us upfront and we’ll tell you honestly what we can do.
Why Fort Lauderdale Homeowners Call Winslow for Awning and Hopper Windows
Ed Winslow started this company in 2011 because he believed a locally owned installer could do the job better than any national chain – not by promising more, but by actually knowing the product, knowing the code, and standing behind the work with a real name and a real address. That hasn’t changed. Every awning and hopper window we install in Fort Lauderdale goes through the same process: proper measurement, proper permit, proper installation, and a final inspection before we consider the job done.
The 36500-Day Done Right Promise means exactly what it sounds like. If it’s not right, we come back and make it right. No expired warranty disclaimers. No “call the manufacturer.” Ed’s name is on the door – and on every job we do.
Our technicians are background-checked and arrive in uniform. You know who’s coming before the truck pulls up. We answer the phone at 2 a.m. because sometimes a window fails during a storm and waiting until morning isn’t an option. We charge the same rate for seniors and veterans that we always have – 10% off, permanently, no expiration. And we’ll give you a free second opinion if another contractor’s estimate doesn’t add up.
If you’re comparing options for Window Installation in Fort Lauderdale – whether it’s awning and hopper windows, impact windows for the whole house, or a single problem opening you’ve been putting off – we’re the one down the road. Call (904) 747-8989 and a real person will pick up.
Written by Ed Winslow, Owner at Winslow Windows & Doors, serving Fort Lauderdale since 2011.
Six Reasons Homeowners Choose Winslow Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.