Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterPGT Door Installation: The Fort Lauderdale Owner’s Guide
PGT door installation in Fort Lauderdale typically runs $450-$1,400 depending on the door type, hinge hardware, and whether we’re replacing a full door unit or swapping a failed component like a roller, hinge, or threshold. We stock PGT-compatible parts on our trucks, so most jobs wrap up in a single visit. What usually brings homeowners to this page isn’t a plan to upgrade – it’s a door that suddenly won’t close cleanly, a sag that’s scraping the frame, or a seal that’s let salt air and humidity start doing what it does. If you’re reading this, you probably already know the part that failed. We’ll help you confirm it, price it, and get it done.
Key Takeaways
- We’re an independent installer, not a PGT affiliate – but we’ve been installing and repairing their doors in Fort Lauderdale since 2011.
- Most PGT door parts are on our trucks in Fort Lauderdale, which means one trip in most cases.
- Upfront pricing: you get a written line-item quote before we start, and the number doesn’t move once work begins.
- Every install carries the 36500-Day Done Right Promise. If it’s not right, Ed Winslow makes it right.
Which PGT Models This Applies To
We install and service the full range of PGT residential door lines you see throughout Fort Lauderdale: the WinGuard aluminum and vinyl impact-rated doors, the Premier and Spectra vinyl sliding glass doors, and the ClassicVue and 5500 series. Each series uses different hardware specs – WinGuard doors, for example, take heavy-gauge stainless steel hinges rated for the added weight of impact glass, while Spectra sliders run on different roller assemblies than the 5500 line. Getting that wrong isn’t a small error; it’s a door that binds in six months.
When we identify parts, we don’t guess. PGT stamps a label on the door frame edge, usually near the hinge side or bottom rail, with the series name and manufacturing date. If that’s faded – and in Fort Lauderdale, with our sun and salt, it often is – we measure the panel weight, glass thickness, and roller or hinge dimensions to match the right component. For most PGT doors, OEM parts are worth the extra cost because the specs are exact. Aftermarket equivalents exist and can run 20-30% less, but we’ll only recommend them when we know from experience they hold up to coastal exposure. Some do. Some don’t. We’ll tell you straight.
Signs Your PGT Door Installation Is Failing
- The door drags or scrapes along the track or threshold. This usually means the rollers or lower hinge bearings have worn, or the panel has dropped slightly out of square. The fix before permanent frame damage is a roller or hinge replacement, not forcing it shut.
- You feel resistance or hear grinding when opening or closing. Salt air and fine beach sand get into roller assemblies and hinge pins in Fort Lauderdale faster than inland owners will ever experience. That grit wears parts from the inside.
- Water pools inside the track after rain, or dampness shows along the bottom interior wall. A failed bottom sweep or threshold gasket lets wind-driven rain under the door. In Fort Lauderdale, this is the failing part we see most after heavy afternoon storms.
- Visible light or daylight gaps around the door edges. Worn weatherstripping, a sprung hinge, or a frame that’s shifted with heat and humidity lets conditioned air out and bugs in. The fix is usually a seal replacement plus a hardware adjustment, which we handle the same visit.
- The door slams or swings on its own. That’s a sign the closer or hinge tension has failed. On an impact-rated PGT door, a self-swinging panel can crack glass or warp the frame. Ignore it and the repair gets more expensive.
Replacement Cost & What’s Included
Our installed pricing for PGT door repair and installation in Fort Lauderdale breaks down like this:
| Work Scope | Typical Installed Range | What’s Included |
|---|---|---|
| Roller or hinge replacement (sliding or hinged PGT door) | $180 - $420 | OEM or vetted aftermarket parts, labor, alignment, 36500-Day Done Right Promise |
| Weatherstripping, sweep, and threshold gasket replacement | $150 - $350 | Material, removal of old adhesive, reseal, water test |
| Full door panel or unit installation | $950 - $1,400+ | Product, tear-out, disposal, frame install, caulking, hardware, warranty |
What drives the range? Panel size and weight, whether it’s impact-rated WinGuard glass, condition of the existing frame, and access. A third-floor condo door from the 1990s near Las Olas takes longer than a ground-level ranch house in Victoria Park. You get a written line-item quote before we touch a screwdriver, and the price doesn’t change once work starts. And yes – $40 off any repair over $200 applies here, along with a permanent 10% discount for seniors and veterans. No trip charge inside Broward County, so a quote costs you nothing to get.
DIY or Call Us?
There are a few things you can safely check: whether the track is clear of sand and debris, whether screws on the handle and lock plate have backed out, whether the weatherstripping is physically torn. Cleaning and tightening are fine, and honestly, in Fort Lauderdale you should clear your door track after every storm. But adjusting a sagging PGT door, replacing rollers, or re-hanging a full-size impact door isn’t a Saturday project. Those panels weigh 150-300 pounds with impact glass. One slip is a crushed foot or a cracked panel, and now you’ve bought a whole new door instead of a $220 repair. If it involves lifting, spring tension, or frame work, call us at (904) 747-8989. The estimate is free. The lesson doesn’t have to be expensive.
FAQs
With proper maintenance, PGT doors typically last 20-30 years in Fort Lauderdale, though weatherstripping and rollers usually need replacement every 5-8 years because of salt air and intense sun exposure. Impact-rated frames and glass hold up well, but moving hardware takes the real beating here.
Yes, in most cases. We repair far more PGT doors in Fort Lauderdale than we replace. Rollers, hinges, sweeps, gaskets, lock hardware, and frame adjustments fix the majority of problems at a fraction of full door cost. Full replacement only makes sense when the panel or frame is cracked, rotted, or distorted.
Most roller, hinge, and weatherstripping work on PGT doors is done in one visit, usually 1-3 hours. A full door unit replacement takes 4-8 hours including tear-out, frame work, and weatherproofing. We’ll give you a straight time estimate on the quote. Call (904) 747-8989 and we’ll walk you through it.
Our trucks carry common PGT hardware in Fort Lauderdale: rollers, hinges, sweeps, gaskets, strike plates, and handle sets for the series we see most often. Rare or custom parts can take a few days to source, but we’ll tell you before you commit to anything. We also stock compatible parts for CGI, CWS, and ES Windows doors.
Written by Ed Winslow, Owner, Winslow Windows & Doors at Winslow Windows & Doors, serving Fort Lauderdale and nearby areas.
Six Reasons Homeowners Choose Winslow Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.